Easy control
The control is based on an Eaton Easy control relay, which is operated in a self-explanatory way with the help of a touch panel.
The software has been developed and programmed by us and is therefore optionally customisable by arrangement.
Two variants are offered as standard:
1. with built-in pneumatic valve. This variant can be used in the near of the sampler, as the control air line may only be a maximum of 4 metres long.
2. purely electric, i.e. a direct electro-pneumatic control is required at the sampler. No pneumatics are installed in the control box and one is independent of the line length. (over 4 metres distance to the sampler).
A control system for two samplers is also available.
Controls for more than two samplers and controls for samplers with cleaning and CO2 valves are also available.
The software has been developed and programmed by us and is therefore optionally customisable by arrangement.
Two variants are offered as standard:
1. with built-in pneumatic valve. This variant can be used in the near of the sampler, as the control air line may only be a maximum of 4 metres long.
2. purely electric, i.e. a direct electro-pneumatic control is required at the sampler. No pneumatics are installed in the control box and one is independent of the line length. (over 4 metres distance to the sampler).
A control system for two samplers is also available.
Controls for more than two samplers and controls for samplers with cleaning and CO2 valves are also available.
Electrik-pneumatical controlling of the sampler Simplex 2600
The direct activation of the sampler via a cable from the control, from 24 VDC to 240VAC, has been realized since May 2017. The 3/2-way valve made of VA with direct electrical activation (IP 65) is docked directly to the sampler and is activated electrically without any time delay by pneumatic power.
The distance between the control and the sampler (4 metres), which is caused by the pneumatics, is thus no longer applicable (distance considerably extended but depending on the resistance of the cable).
The sampler can therefore be connected directly, without any pilot valve, to your system control or one of our controls.
The direct activation of the sampler via a cable from the control, from 24 VDC to 240VAC, has been realized since May 2017. The 3/2-way valve made of VA with direct electrical activation (IP 65) is docked directly to the sampler and is activated electrically without any time delay by pneumatic power.
The distance between the control and the sampler (4 metres), which is caused by the pneumatics, is thus no longer applicable (distance considerably extended but depending on the resistance of the cable).
The sampler can therefore be connected directly, without any pilot valve, to your system control or one of our controls.